DeutschEnglish

Multi Brush

Multifunctional surface treatment system for dry or wet cleaning, brushing, dedusting, tufting and emerising of all web-like fabrics such as textiles and carpets, metal foils, paper, non-wovens, etc.

Easy integration into existing line concepts, with various brush arrangements and brush table shapes.

Deliverable as complete, pre-assembled, hard-wired modules in three sizes:
Multi Brush®1600 -  Multi Brush®2000 -  Multi Brush®2800

 

Multi Brush® 1600 for flocked fabrics

height = 2.400 mm
width = 800 mm

 

  • Standard working width 1,600 mm
  • For single-sided fabric treatment
  • Galvanically coated steel base frame
  • 3 full-body pile brushing rollers, nylon bristles,
  • 0.5 mm dia., bristle height 30 mm
  • Pile brushes working against pointed tables with stainless steel rollers
  • Drive 3x 2.2 kW, 400 V
  • Pile brush speed individually steplessly variable via frequency converter; rotational direction of each brush individually selectable
  • Angle of brush tables adjustable via handwheel; includes adjustment angle indicator
  • Ionisation unit retrofittable
  • Optionally, with driven draw roller (including spreading roller)
  • Optionally, pile brushes also driven via toothed drive belts using only one drive motor
  • Particle extraction over each brushing roller by means of central medium pressure fan with sheet steel impeller and noise control encapsulation; power consumption individually adaptable to the particles requiring extraction; air exhaust capacity 12,600 m3/h; integral silencer at the discharge end
  • Filter unit with 24 filter bags (300 mm dia., 2,800 mm length) and 4 bag fitting nozzles
  • Scope of supply includes all connecting piping for the particle extraction as well as 100 polyethylene bags for the filtered particles.

nach oben

Multi Brush® 2000 for flocked fabrics

height = 2.400 mm
width = 800 mm

  • Standard working width 2,000 mm
  • Galvanically coated steel base frame
  • 3 full-body pile brushing rollers, nylon bristles
  • 0.4 mm dia., bristle height 30 mm
  • 3 back-brushing rollers with full-body bristles,
    nylon bristles 0.3 mm dia., bristle height 30 mm
  • Pile brushes working against pointed tables with stainless steel rollers
  • Back-brushing rollers working against round tables (ground and chrome-plated)
  • Pile brush speed individually steplessly variable via frequency converter; rotational direction of each brush individually selectable
  • All brush tables individually adjustable via handwheel; includes adjustment angle indicator
  • Drive motors 2.2 kW, 220 / 400 V for pile and back-brushing rollers
  • Speed individually steplessly variable via frequency converter
  • Pile and back-brushing rollers interlinked via maintenance-free toothed belt drives
  • Fabric transport roller with worm gear motor
    1.5 kW, 220 / 400 V
  • Ionisation unit retrofittable
  • Particle extraction over each brushing roller by means of central medium pressure fan with sheet steel impeller
  • High-performance galvanised sheet steel separator for particles, including condensate drainage
  • Scope of supply includes all connecting piping for the particle extraction as well as pipe fittings, flanges and bolts.

nach oben

Multi Brush® 2800 for velours, carpets

height = 2.400 mm
width = 800 mm

  • Standard working width 2,000 mm
  • For double-sided fabric treatment
  • Galvanically coated steel base frame
  • 2 full-body pile brushing rollers, 110 mm dia.,
    nylon bristles 0.4 mm dia., bristle height 30 mm
  • 1 back-brushing roller with full-body bristles,
    nylon bristles 0.2 mm dia., bristle height 30 mm
  • Pile brushes working against pointed tables with stainless steel rollers
  • Back-brushing rollers working against round tables (ground and chrome-plated)
  • All brush table angles individually adjustable via handwheel; includes adjustment angle indicator
  • Drive motors 2.2 kW, 220 / 400 V for pile and back-brushing rollers; all brushing rollers interlinked via maintenance-free toothed belt drives
  • Speed individually variable via frequency-controlled motor
  • Joint rotational direction of the pile and back-brushing rollers freely selectable
  • Ionisation unit retrofittable
  • Particle extraction over each brushing roller by means of central medium pressure fan with sheet steel impeller
  • Scope of supply includes all connecting piping for the particle extraction as well as pipe fittings, flanges and bolts

nach oben